Research Safety-Aware Assistive Teleoperation
Sampling-Based Grasp and Collision Prediction for Assisted Teleoperation
IEEE International Conference on Robotics and Automation (ICRA), 2025
@inproceedings{manschitz2025sampling,
title = {Sampling-Based Grasp and Collision Prediction for Assisted Teleoperation},
author = {Manschitz, Simon and Gueler, Berk and Ma, Wei and Ruiken, Dirk},
booktitle = {IEEE International Conference on Robotics and Automation (ICRA)},
year = {2025}
}
Shared autonomy allows for combining the global planning capabilities of a human operator with the strengths of a robot such as repeatability and accurate control. In a real-time teleoperation setting, one possibility for shared autonomy is to let the human operator decide for the rough movement and to let the robot do fine adjustments, e.g., when the view of the operator is occluded. We present a learning-based concept for shared autonomy that aims at supporting the human operator in a real-time teleoperation setting. At every step, our system tracks the target pose set by the human operator as accurately as possible while at the same time satisfying a set of constraints which influence the robot's behavior. An important characteristic is that the constraints can be dynamically activated and deactivated which allows the system to provide task-specific assistance. Since the system must generate robot commands in real-time, solving an optimization problem in every iteration is not feasible. Instead, we sample potential target configurations and use Neural Networks for predicting the constraint costs for each configuration. By evaluating each configuration in parallel, our system is able to select the target configuration which satisfies the constraints and has the minimum distance to the operator's target pose with minimal delay. We evaluate the framework with a pick and place task on a bi-manual setup with two Franka Emika Panda robot arms with Robotiq grippers.
AI-generated summary · may contain mistakes, see the paper
In real-time teleoperation, the operator should decide the rough motion while the robot handles fine adjustments, for example when the operator's view is occluded. The paper frames assisted teleoperation as tracking the operator's target pose as closely as possible subject to constraints (static, self, dynamic and mutual collisions, and valid pre-grasp poses) that a simple state machine switches on and off for task-specific assistance.
Solving this constrained optimization at every step is too slow, so the system samples robot configurations around the current state, predicts every active constraint cost with small neural networks for all samples in parallel, and executes the feasible configuration closest to the operator's target. On two Franka arms controlled from VR, all 12 assisted table-clearing trials succeeded, against 10 of 12 without assistance.
Key results
- 1,024sampled configurations scored per step
- ~25 Hzcommand rate with two Franka arms and VR control
- 12 / 12successful table-clearing trials, vs. 10 / 12 without assistance